If your new clock (purchased from Bill's Clockworks) is not operating properly, please e-mail us or phone us a 1-888-742-5625 and tell us the problem, and we may be able to help you adjust the clock. Most problems with a new clock relate to adjusting the beat and the chimes and need to be adjusted by the owner.
Most of our clocks carry a two or three year warranty. A few clocks carry a one year warranty. The description of each clock gives the length of its warranty.
(Bill's Clockworks note: This is a typical Sternreiter warranty - see the paperwork with your clock if you need service.)
Thank you for purchasing a clock selected for and guaranteed in North America by North Coast Imports, Inc.
For fifty years, North Coast Imports has offered a select array of clocks that are not only treasures to behold, they are heirlooms to be shared from one generation to the next.
North Coast Imports warranties this clock for a period of one year from the date of consumer purchase, provided the clock has been setup and maintained following the directions furnished with the clock.
The warranty does not cover setup costs (including hammer and hand adjustment or time regulation as described in the instruction manual), lubrication, broken suspension springs, unauthorized repairs, clocks not purchased from an authorized North Coast Imports dealer, or clocks that have been shipped improperly. This warranty does not apply to damage to the clock due to negligence, modification (such as switching weights, pendulums, or dial) or to other causes unrelated to defective material or workmanship. For proper operation and continued enjoyment of your clock, please follow the installation and care recommendations found with your instructions. If you have any problem that is not covered in your manual, please call or e-mail your dealer from whom you bought the clock.
Wood products may have slight variances in color due to wood grain and natural characteristics of wood material. Shrinkage and expansion of wood solids and veneers may occur with changes in temperature, humidity and altitude. These are normal characteristics of wood products and are not covered under warranty.
Consistency in room temperature and humidity is recommended; avoid exposing the clock to extreme changes in temperature, which may cause fractures in the finish, joints or veneers. Clocks exposed to extreme conditions (very dry or dusty, very humid, or ocean front) will require more frequent service to the mechanism.
Procedure to follow when there is a defect or problem:
Products are picked up at North Coast Imports, Inc. and signed for in good condition by the freight carrier. Damage caused by the carrier in transit between North Coast Imports, Inc. and the dealer/consumer is not covered by the warranty. Freight damaged products must be inspected by the carrier within 15 days of delivery by the carrier. In the event of freight damage or loss, a claim is to be filed by the consignee (person receiving the clock) with the freight carrier.
All expressed and implied warranties, including implied warranties of merchantability and fitness for purpose, are limited to the time periods set forth above.